ABSTRACT Background: Ocular toxoplasmosis is the leading cause of infectious posterior uveitis worldwide, accounting for 30-50% of all cases in immunocompetent patients. Conventional treatment is associated with adverse effects and does not prevent recurrence. Intravitreal drug administration can improve disease outcomes and reduce side effects. Herein, we conducted a systematic review and meta-analysis on the efficacy of intravitreal injections for treating ocular toxoplasmosis. Methods: The systematic search was conducted using PubMed, SciELO, and Google Scholar with the descriptors “ocular toxoplasmosis” AND “intravitreal”. We analyzed studies that met the inclusion criteria, i.e., experimental cases in patients treated intravitreally for ocular toxoplasmosis. Considering the systematic review, we focused on the number of intravitreal injections, the therapeutic drug class, and the presence of preexisting conditions. To assess the efficacy of intravitreal injections, a meta-analysis was performed using visual acuity, side effects, disease recurrence, and inflammatory responses as variables. Results: Intravitreal injection-induced side effects were rarely observed (0.49% [0.00, 1.51%] ). The use of antiparasitic and anti-inflammatory drugs afforded improved visual acuity (99.81% [98.60, 100.00%]) and marked effectiveness in treating ocular toxoplasmosis. Conclusions: Intravitreal injections may facilitate the successful treatment of ocular toxoplasmosis. However, clinicians should carefully evaluate the presence of preexisting conditions for ocular toxoplasmosis or previous diseases, as these can impact the decision to administer intravitreal injections.

Abstract In the hospital environment, postoperative pain is a common occurrence that impairs patient recovery and rehabilitation and lengthens hospitalization time. Racemic bupivacaine hydrochloride (CBV) and Novabupi® (NBV) (S (-) 75% R (+) 25% bupivacaine hydrochloride) are two examples of local anesthetics used in pain management, the latter being an alternative with less deleterious effects. In the present study, biodegradable implants were developed using Poly(L-lactide-co-glycolide) through a hot molding technique, evaluating their physicochemical properties and their in vitro drug release. Different proportions of drugs and polymer were tested, and the proportion of 25%:75% was the most stable for molding the implants. Thermal and spectrometric analyses were performed, and they revealed no unwanted chemical interactions between drugs and polymer. They also confirmed that heating and freeze-drying used for manufacturing did not interfere with stability. The in vitro release results revealed drugs sustained release, reaching 64% for NBV-PLGA and 52% for CBV-PLGA up to 30 days. The drug release mechanism was confirmed by microscopy, which involved pores formation and polymeric erosion, visualized in the first 72 h of the in vitro release test. These findings suggest that the developed implants are interesting alternatives to control postoperative pain efficiently.

Angiogenesis is the formation of new blood vessels from preexisting vasculature. Uncontrolled angiogenesis is associated with progression of several ocular pathologies, such as diabetic retinopathy and macular degeneration. Thus, the inhibition of this process consists in an interesting therapeutic target. Corosolic acid (CA) is a natural derivative of ursolic acid, found in many medicinal herbs and exhibits numerous biological properties, including the antiangiogenic activity. The present study reports the production of CA-loaded poly d,l-lactidecoglycolide acid (PLGA) devices by melt technique. HPLC-UV method was developed and validated to evaluate the uniformity and the release profile of the developed systems. The devices were also characterized by Fourier transform infrared spectroscopy, thermal analysis, and scanning electron morphology. It was studied the antiangiogenic activity of the CA-polymer system, using an in vivo model, the chorioallantoic membrane assay (CAM). CA was dispersed uniformly in the polymer matrix and no chemical interaction between the components of the formulation was verified. The implants presented a sustained release of the drug, which was confirmed by the morphological study and demonstrated an antiangiogenic activity. Therefore, the developed delivery system is a promising therapeutic tool for the treatment of ocular diseases associated with neovascularization or others related to the angiogenic process.

Neuroimmune interactions underlying the development of pain sensitization in models of neuropathic pain have been widely studied. In this study, we evaluated the development of allodynia and its reduction associated with peripheral antineuroinflammatory effects induced by a dexamethasone-loaded biodegradable implant. Chronic constriction injury (CCI) of the sciatic nerve was performed in Wistar rats. The electronic von Frey test was applied to assess mechanical allodynia. The dexamethasone-loaded implant was placed perineurally at the moment of CCI or 12 days after surgery. Dorsal root ganglia (DRG; L4-L5) were harvested and nuclear extracts were assayed by Western blot for detection of nuclear factor (NF)-κB p65/RelA translocation. Dexamethasone delivered from the implant delayed the development of allodynia for approximately three weeks in CCI rats when the implantation was performed at day 0, but allodynia was not reversed when the implantation was performed at day 12. NF-κB was activated in CCI rat DRG compared with naïve or sham animals (day 15), and dexamethasone implant inhibited p65/RelA translocation in CCI rats compared with control. This study demonstrated that the dexamethasone-loaded implant suppresses allodynia development and peripheral neuroinflammation. This device can reduce the potential side effects associated with oral anti-inflammatory drugs.

Abstract Background: The great diversity of molecules found in spider venoms include amino acids, polyamines, proteins and peptides, among others. Some of these compounds can interact with different neuronal receptors and ion channels including those present in the ocular system. To study potential toxicity and safety of intravitreal injection in rabbits of LyeTx I b, a synthetic peptide derived from the toxin LyeTx I found in venom from the spider Lycosa eritrognatha and to evaluate the angiogenic activity on a CAM model. Methods: ARPE-19 cells were treated with LyeTx I b (0.36; 0.54; 0.72; 2.89; 4.34 or 9.06 μM). In this study, New Zealand rabbits were used. LyeTx I b (2.89 μM) labeled with FITC dissolved in PBS, or only PBS, were injected into vitreous humor. Electroretinogram (ERG) was recorded 1 day before injection and at 7,14 and 28 days post-injection. Clinical examination of the retina was conducted through tonometer and eye fundus after ERG. Eyes were enucleated and retinas were prepared for histology in order to assess retinal structure. CAMs were exposed to LyeTx I b (0.54; 0.72; 2.17 or 2.89 μM). Results: ARPE-19 cells exposed to LyeTx I b showed cell viability at the same levels of the control. The fluorescence of LyeTx I b labeled with FITC indicated its retinal localization. Our findings indicate ERG responses from rats injected in the eye with LyeTx I b were very similar to the corresponding responses of those animals injected only with vehicle. Clinical examination found no alterations of intraocular pressure or retinal integrity. No histological damage in retinal layers was observed. CAM presented reduced neovascularization when exposed to LyeTx I b. Conclusions: Intravitreal injection of LyeTx I b is safe for use in the rabbit eye and prevents neovascularization in the CAM model, at Bevacizumab levels. These findings support intravitreal LyeTx l b as a good candidate to develop future alternative treatment for the retina in neovascularization diseases.

RESUMO Objetivos: Avastin® (bevacizumabe) é um anticorpo monoclonal inibidor do fator de crescimento endotelial de vasos (VEGF) utilizado "off-label" por meio de administração intravítrea para o tratamento de doenças oculares. A sua aplicação clínica associada ao custo-benefício do medicamento gerou uma demanda para seu fracionamento em frascos de dose única para utilização pela via intraocular. No entanto, a segurança do fracionamento do anticorpo em frascos de dose única ainda é alvo de discussão. Neste trabalho, a estabilidade e a eficácia do Avastin® fracionado em frascos ou ampolas de vidro de dose unitária por farmácias de manipulação do mercado foram avaliadas. Métodos: As técnicas de eletroforese em gel de poliacrilamida (PAGE), cromatografia por exclusão de tamanho (SEC), espalhamento dinâmico da luz (DLS) e turbidimetria foram empregadas para avaliar a formação de agregados de diferentes tamanhos. Alterações na atividade biológica do bevacizumabe foram estudadas utilizando ELISA. Resultados: Amostras referência e do bevacizumabe fracionado apresentaram resultados semelhantes quando analisado por gel de poliacrilamida. Por cromatografia por exclusão de tamanho, um pequeno aumento na quantidade de agregados de alta massa molar seguido de uma redução nos monômeros do bevacizumabe foram observados para as amostras das três farmácias de manipulação quando comparado ao referência. A comparação dos cromatogramas mostrou uma quantidade de redução do monômero inferior a 1% para todas as amostras fracionadas. Por espalhamento dinâmico da luz e turbidimetria, não foram detectados agregados de proteína na faixa de tamanho de micrômetro e nanômetro. No ensaio de eficácia, o bevacizumabe fracionado preservou sua função biológica pois apresentou menos de 3% de perda na capacidade de ligação ao VEGF quando comparado ao referência. Conclusão: Este estudo sugere que o bevacizumabe se mantem estável após fracionamento em ampolas e frascos de vidro de dose unitária pois não foram observadas agregação e/ou fragmentação de proteínas e perda de atividade biológica em quan tidades significativas.

ABSTRACT Purpose: Avastin® (bevacizumab) is an anti-vascular endothelial growth factor (VEGF) monoclonal antibody given as an off-label drug by intravitreal administration for treatment of ocular diseases. The drug's clinical application and its cost-benefit profile has generated demand for its division into single-use vials to meet the low volume and low-cost doses necessary for intraocular administration. However, the safety of compounding the drug in single-use vials is still under discussion. In this study, the stability and efficacy of Avastin® repacked in individual single-use glass vials and glass ampoules by external compounding pharmacies were evaluated. Methods: Polyacrylamide gel electrophoresis (PAGE), size-exclusion chromatography (SEC), dynamic light scattering (DLS), and turbidimetry were selected to detect the formation of aggregates of various sizes. Changes in bevacizumab biological efficacy were investigated by using an enzyme-linked immunosorbent assay (ELISA). Results: Repacked and reference bevacizumab showed similar results when analyzed by PAGE. By SEC, a slight increase in high molecular weight aggregates and a reduction in bevacizumab monomers were observed in the products of the three compounding pharmacies relative to those in the reference bevacizumab. A comparison of repacked and reference SEC chromatograms showed that the mean monomer loss was ≤1% for all compounding pharmacies. Protein aggregates in the nanometer- and micrometer-size ranges were not detected by DLS and turbidimetry. In the efficacy assay, the biological function of repacked bevacizumab was preserved, with <3% loss of VEGF binding capacity relative to that of the reference. Conclusion: The results showed that bevacizumab remained stable after compounding in ampoules and single-use glass vials; no significant aggregation, fragmentation, or loss of biological activity was observed.

This study investigated the adjuvant potential of W/O/W multiple emulsions and microemulsions, comparing them with traditional aluminum hydroxide and oil-in-water emulsion adjuvants against bluetongue vaccine (BTV). Local inflammatory reactions were assessed in rabbits by measuring the temperature of the animals and the skin thickness at the site of application. Antibodies titers were determined by serum-neutralization test. Histological analyses of lesions at the site of adjuvants application were done. Results showed that multiple emulsion and microemulsion maintained their stability even in the presence of complex components and presented adequate characteristics for subcutaneous administration. They were able to induce immune response against BTV, but it was smaller than the traditional adjuvants. Despite microemulsion adjuvant showed lower antibodies titre, it was easier to prepare more stable at 4°C and it was the only one that did not induce any local reaction.

O interferon alfa (IFN-alfa) é um dos principais fármacos utilizados no tratamento de hepatite C, mas o seu uso apresenta limitações que resultam em baixa eficácia do tratamento e não adesão do paciente. Diante disso, este estudo objetiva o desenvolvimento de microesferas de poli-ε-caprolactona (PCL) contendo IFN-alfa como alternativa ao tratamento de hepatite C crônica. As microesferas foram preparadas pelo método de emulsão múltipla seguido de evaporação do solvente e caracterizadas quanto ao diâmetro médio das partículas, morfologia da superfície, taxa e eficiência de encapsulamento. A estabilidade da formulação foi acompanhada durante 90 dias a -20 ºC. O estudo de liberação in vitro foi realizado em PBS. A citotoxicidade da formulação foi avaliada utilizando linhagem de células hepáticas. As microesferas liofilizadas apresentaram diâmetro médio, taxa de encapsulamento e eficiência de encapsulamento de 38,52 ± 4,64 µm, 15,52 ± 3,28% e 83,93 ± 5,76%, respectivamente. Não foram observadas alterações significativas durante o armazenamento e a integridade estrutural da proteína foi mantida após o preparo. Oitenta e dois por cento de IFN-alfa foram liberados em 28 dias e a formulação desenvolvida não apresentou toxicidade para as células testadas. Estudos in vivo estão em andamento para avaliar a atividade biológica do IFN-alfa encapsulado nas microesferas.

Interferon-alpha (IFN-alpha) is one of the main drugs used in the treatment of hepatitis C. Use of IFN-alpha has some limitations that result in poor treatment efficacy and low patient compliance. Therefore, the aim of this study was to develop poly-ε-caprolactone (PCL) microspheres containing IFN-alpha as an alternative for the treatment of chronic hepatitis C. Microspheres were prepared using the multiple emulsion followed by solvent evaporation technique. Particle size, surface morphology, drug content and encapsulation efficiency of the microspheres produced were evaluated. The stability of the formulation was assessed after 90 days at -20ºC. An in vitro release study was performed in PBS. In vitro cytotoxicity of the formulation was studied using hepatic cell line. The freeze-dried microspheres had mean particle size, IFN-alpha content, and encapsulation efficiency of 38.52 ± 4.64 µm, 15.52 ± 3.28% and 83.93 ± 5.76%, respectively. There were no significant changes during storage and the structural integrity of the protein was not compromised by the preparation technique. A total of 82% of the IFN-alpha was released after 28 days and the developed microspheres did not present cytotoxicity to the hepatic cell line. In vivo studies are currently underway to evaluate the biological activity of IFN-alpha encapsulated into microspheres.

The aim of this study was to synthesize and characterize the biodegradable intraocular implants based on poly (D,L-lactide-co-glycolide) (PLGA 75:25) with Cyclosporine-A (CyA) and to evaluate their in vitro drug delivery profile. Thermal analysis was conducted by using Thermogravimetry (TG) and Differential Scanning Calorimetry (DSC). Phase analysis and crystallinity of the polymer-CyA samples were assessed through X ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Finally, microstructure and morphology of the systems were investigated by Scanning Electron Microscopy (SEM). The results showed that CyA was successfully incorporated into PLGA network with drug loading of approximately 31.6%. Also, based on FTIR and thermal analyses (TGA/DSC) no significant physical-chemical interaction was detected at the micro-nanoscale level between polymer/drug. SEM micrographs have indicated a uniform drug distribution in PLGA matrix. XRD patterns have showed that the incorporated semi-crystalline structure of CyA has not significantly altered the polymeric mainly amorphous network. In addition, the results have confirmed the chemical and biological drug stability, the drug distribution into the polymeric matrix and the possibility of cyclosporine prolonged delivery system profile.